- DBDennis B.Verified BuyerI recommend this productRated 5 stars2 months agoAwesome!
As I see this product on YouTube I got to have it, and now that I have it, it is nothing but awesome!
- RTRichard T.Verified BuyerI recommend this productRated 5 stars3 months agoBest removalble mount for smooth surfaces
Bought this mount to hold a large bicycle light on my velomobile. Its works great the light i use is the exposure lights sixpak mk7 and i use a camera mou t adapter to vonnect it to this mount. I did have to use a dremmel to trim down the camera mount to be able to wivel the camera mount down further to project the light forward. I have used it for my gopro as well on my velomobile. Its works great it never fell off while i was riding but it has fallen off while i was just parked.
- RMRafael M.Verified BuyerI do not recommend this productRated 2 stars4 months agoDoes not hold to non-skidd boat deck
Does not hold to non-skidd boat deckSESeaSucker EU4 months ago
We don't make claim to them working on all non-skid surfaces. They tend to reliably work on the more abrasive, "sandpaper" like non-skid surfaces. However, they will not work on any of the diamond pattern, deep grooved non-skids, as the rubber pad needs to be making full contact in order to make a seal and create vacuum.
- DCdave c.Verified BuyerI recommend this productRated 5 stars5 months agoFirst SeaSucker
A sucker for sure !!
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
No, the HDPE and the raw materials we use to manufacture our vacuum mounts all have a high-performance UV inhibitor built in. Your SeaSucker products should look good for years.
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.